[dss-developer] dSS, WIfi und keinen Webserver mehr

Glenn Herrmann IT-7 EDV-Dienstleistungen Glenn.Herrmann at it7-online.de
Sun Feb 17 11:18:59 CET 2013


Hallo,

ja das habe ich auch gedacht und hab wieder Wifi abgeschaltet und bin wieder übers Kabel gegangen. Leider ohne Erfolg .(Auch die 15 Sekunden auf den Knopf um die Einstellungen zurückzusetzten hat nicht geholfen)

Was ich befürhcte das ich mir bei der Installation von dem Wifi Modulen eines zerschossen habe was für den dSS notwenidig ist. Anbei mal ifconfig und auch mal opkg list-installed

IFconfig:

eth0      Link encap:Ethernet  HWaddr A8:99:5C:00:09:0B
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:6 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:1482 (1.4 KiB)
          Interrupt:21 Base address:0x4000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:202 (202.0 B)  TX bytes:202 (202.0 B)

wlan0     Link encap:Ethernet  HWaddr 80:1F:02:82:24:1D
          inet addr:10.10.100.252  Bcast:10.10.100.255  Mask:255.255.255.0
          inet6 addr: 2a02:8070:a23c:df00:821f:2ff:fe82:241d/64 Scope:Global
          inet6 addr: fe80::821f:2ff:fe82:241d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:490 errors:0 dropped:0 overruns:0 frame:0
          TX packets:545 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:55031 (53.7 KiB)  TX bytes:81387 (79.4 KiB)



opkg list-installed:
addon-framework - 1.0.13-r1
angstrom-version - 2:v2012.12-core-r11
at - 3.1.12-r9
autoconf - 2.68-r7
automake - 1.11.2-r3
avahi-autoipd - 0.6.30-r12.1
avahi-daemon - 0.6.30-r12.1
base-files - 3.0.14-r114
base-passwd - 3.5.22-r9
bash - 4.2-r2
bash-dbg - 4.2-r2
binutils - 2.20.1-r9
bootsetup - 0.2-r1
busybox - 1.18.5-r21
busybox-ifplugd - 1.18.5-r21
busybox-syslog - 1.18.5-r21
busybox-udhcpc - 1.18.5-r21
ca-certificates - 20111025-r0
create-certificate - 0.2.3-r1
cronie - 1.4.8-r6
dbus-1 - 1.4.16-r1
dropbear - 0.53.1-r2
ds485d - 1.1.1-r2
dsa - 0.15.4-r1.18
dsa-locale-de-de - 0.15.4-r1.18
dsa-locale-en-us - 0.15.4-r1.18
dsa-locale-fr-ch - 0.15.4-r1.18
dsa-locale-tr-tr - 0.15.4-r1.18
dsa-ui-module - 0.9.3-r1
dsm-firmware - 1.11.0-r2
dsm-firmware-upgrade - 0.11.3-r1
dsm-firmware-upgrade-locale-de-de - 0.11.3-r1
dsm-firmware-upgrade-locale-en-us - 0.11.3-r1
dsm-firmware-upgrade-locale-fr-ch - 0.11.3-r1
dsm-firmware-upgrade-locale-tr-tr - 0.11.3-r1
dss - 1.18.0+gitr2535+a02437c-r1.82
dss-add-on-feeds - 0.1-r8
dss-web-module - 1.14.0+gitr947+38b88fd-r6
dss11-buttond - 0.2-r3
dss11-help - 0.8-r1
dss11-image-version - 1:v2012.03-core-r20120301174541
dss11-installation-manual-de-de - 0.8-r1
dss11-installation-manual-en-us - 0.8-r1
dss11-installation-manual-fr-ch - 0.8-r1
dss11-installation-manual-tr-tr - 0.8-r1
dss11-ledd - 0.3.0-r1
dss11-usb-upgrade - 1.4.0-r1
dss11-users - 1.0-r1
dss11-utils - 0.4.0+gitr9adbd915c7ffc7ed4dc768f5e4b39d745dd3cbda-r2
dss11-websetup - 0.34.5+gitr708+4e17220-r1
e2fsprogs - 1.41.14-r4
e2fsprogs-badblocks - 1.41.14-r4
e2fsprogs-e2fsck - 1.41.14-r4
e2fsprogs-mke2fs - 1.41.14-r4
eglibc-binary-localedata-de-de - 2.12-r22
eglibc-binary-localedata-en-us - 2.12-r22
eglibc-binary-localedata-fr-ch - 2.12-r22
eglibc-binary-localedata-tr-tr - 2.12-r22
eglibc-dbg - 2.12-r27
eglibc-extra-nss - 2.12-r28
elfutils - 0.148-r7
firmware-carl9170 - 1.9.2-r0
g++ - 4.5-r49+svnr184907
g++-symlinks - 4.5-r49+svnr184907
gcc - 4.5-r49+svnr184907
gcc-dev - 4.5-r49+svnr184907
gcc-symlinks - 4.5-r49+svnr184907
gettext-runtime - 0.18.1.1-r8
git - 1.7.7-r2
gnu-config - git-r1+gitre35217687ee5f39b428119fe31c7e954f6de64f0.9
gsoap - 2.8.5-r1.1
haserl - 0.9.29-r1
i2c-tools - 3.0.3-r0
initscripts - 1.0-r129
iw - 3.2-r1
kernel - 3.0-r8
kernel-3.0.17 - 3.0-r8
kernel-image-3.0.17 - 3.0-r8
kernel-module-aes-generic - 3.0-r8
kernel-module-ansi-cprng - 3.0-r8
kernel-module-arc4 - 3.0-r8
kernel-module-ath - 3.0-r8
kernel-module-carl9170 - 3.0-r8
kernel-module-cfg80211 - 3.0-r8
kernel-module-crc-ccitt - 3.0-r8
kernel-module-crc-itu-t - 3.0-r8
kernel-module-ecb - 3.0-r8
kernel-module-ext3 - 3.0-r8
kernel-module-ext4 - 3.0-r8
kernel-module-hmac - 3.0-r8
kernel-module-jbd - 3.0-r8
kernel-module-jbd2 - 3.0-r8
kernel-module-loop - 3.0-r8
kernel-module-mac80211 - 3.0-r8
kernel-module-mbcache - 3.0-r8
kernel-module-ntfs - 3.0-r8
kernel-module-rt2800lib - 3.0-r8
kernel-module-rt2800usb - 3.0-r8
kernel-module-rt2x00lib - 3.0-r8
kernel-module-rt2x00usb - 3.0-r8
kernel-module-rtl8192c-common - 3.0-r8
kernel-module-rtl8192cu - 3.0-r8
kernel-module-rtlwifi - 3.0-r8
kernel-module-scsi-wait-scan - 3.0-r8
kernel-module-sha256-generic - 3.0-r8
kernel-module-vfat - 3.0-r8
kernel-module-zd1211rw - 3.0-r8
libavahi-client3 - 0.6.30-r12.1
libavahi-common3 - 0.6.30-r12.1
libavahi-core7 - 0.6.30-r12.1
libblkid1 - 2.19.1-r15
libboost-filesystem1.47.0 - 1.47.0-r0.0
libboost-program-options1.47.0 - 1.47.0-r0.0
libboost-system1.47.0 - 1.47.0-r0.0
libboost-thread1.47.0 - 1.47.0-r0.0
libbz2-0 - 1.0.6-r5
libc6 - 2.12-r28
libc6-dev - 2.12-r28
libcairo2 - 1.10.2-r3.1
libcap2 - 2.22-r2
libcidn1 - 2.9-r37.4.6
libcom-err2 - 1.41.14-r4
libconfig - 1.4.8-r1
libcrypto1.0.0 - 1.0.0j-r0.3
libcurl5 - 7.24.0-r2
libdaemon0 - 0.14-r0
libdbus-1-3 - 1.4.16-r1
libds485-client1 - 1.2.4+gitr6+a40b1d5961b406437d76a6c14679e21d6eedfe00-r1
libds485-core-dbg - 1.1.4+gitr2+9e0d9396b9c7f245298f8473223c24a16c8f2ff5-r1
libds485-core1 - 1.1.4+gitr2+9e0d9396b9c7f245298f8473223c24a16c8f2ff5-r1
libdsm-api-v2-2 - 2.6.1+gitr16+3a8284d274e8d6a19d0a3b955cbdd743a16af852-r1
libe2p2 - 1.41.14-r4
libexpat1 - 2.0.1-r1
libffi5 - 3.0.10-r0
libfontconfig1 - 2.8.0-r4
libfreetype6 - 2.4.6-r1
libgcc-dev - 4.5-r36.1+svnr170880.9
libgcc-s-dev - 4.5-r49+svnr184907
libgcc1 - 4.5-r49+svnr184907
libgcrypt11 - 1.5.0-r0
libglib-2.0-0 - 1:2.30.1-r0
libgmp-dev - 5.0.4-r0
libgmp10 - 5.0.4-r0
libgmpxx4 - 5.0.4-r0
libgnutls-extra26 - 2.12.14-r3.0
libgnutls26 - 2.12.17-r6.0
libgpg-error0 - 1.10-r1
libical - 0.47-r0
libiw29 - 1:29-r2
libjson0 - 0.9-r2
liblzo2-2 - 2.06-r0
libmozjs185-1.0 - 1.8.5-r4
libmpc-dev - 0.8.2-r1.9
libmpc2 - 0.8.2-r1.9
libmpfr4 - 3.1.0-r1
libnl-3-200 - 3.2.3-r0
libnl-genl-3-200 - 3.2.3-r0
libnss-mdns - 0.10-r5
libopkg1 - 1:0.1.8+svnr635-r16
libpcre0 - 8.20-r0
libperl5 - 5.14.2-r6
libpixman-1-0 - 0.24.0-r5.0
libpng12-0 - 1.2.46-r2
libpopt0 - 1.16-r0
librrd - 1.4.7-r1
libsqlite3-0 - 3.7.7.1-r1
libss2 - 1.41.14-r4
libssl1.0.0 - 1.0.0j-r0.3
libstdc++-dev - 4.5-r49+svnr184907
libstdc++6 - 4.5-r43+svnr178923
libtasn1-3 - 2.11-r0
libthread-db1 - 2.9-r37.4.6
libtinfo5 - 5.9-r4.1
libtool - 2.4.2-r3.0
libupnp - 1.6.13-r1
libusb-0.1-4 - 1:0.1.3-r0
libusb-1.0-0 - 1.0.8-r0
libuuid1 - 2.19.1-r15
libwrap0 - 7.6-r7
libxml2 - 2.7.8-r5
libxml2-utils - 2.7.8-r5
libz1 - 1.2.6-r1
lighttpd - 1.4.31-r43.1
lighttpd-module-access - 1.4.31-r43.1
lighttpd-module-accesslog - 1.4.31-r43.1
lighttpd-module-auth - 1.4.31-r43.1
lighttpd-module-cgi - 1.4.31-r43.1
lighttpd-module-dirlisting - 1.4.31-r43.1
lighttpd-module-indexfile - 1.4.31-r43.1
lighttpd-module-proxy - 1.4.31-r43.1
lighttpd-module-redirect - 1.4.31-r43.1
lighttpd-module-staticfile - 1.4.31-r43.1
linux-firmware - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rt2561 - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rt2661 - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rt28x0 - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rtl8192ce - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rtl8192cu - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
linux-firmware-rtl8192su - 0.0+git1+d543c1d98fc240267ee59fff93f7a0f36d9e2fc3-r3
locale-base-de-de - 2.12-r22
locale-base-en-us - 2.12-r22
locale-base-fr-ch - 2.12-r22
locale-base-tr-tr - 2.12-r22
logrotate - 3.7.9-r4
m4 - 1.4.16-r2
make - 3.82-r2
module-init-tools-depmod - 3.16-r0
modutils-initscripts - 1.0-r6
msmtp - 1.4.24-r7
mtd-utils - 1.4.6-r0
netbase - 4.47-r1
nspr - 4.8.9-r2
ntp - 4.2.6p3-r10
ntpdate - 4.2.6p3-r10
openssl - 1.0.0e-r15.4
openssl-misc - 1.0.0e-r15.4
openssl-so-links - 1.0.0e-r15.4
opkg - 1:0.1.8+svnr635-r16
opkg-collateral - 1.0-r4
opkg-config-base - 1.0-r0
opkg2json - 0.4.0-r1
pango - 1.29.4-r4.0
pango-module-basic-fc - 1.29.4-r4.0
pciutils-ids - 3.1.7-r2
perl - 5.14.2-r6
perl-module-app-cpan - 5.14.2-r6
perl-module-bytes - 5.14.2-r6
perl-module-constant - 5.14.2-r6
perl-module-cwd - 5.14.2-r6
perl-module-data-dumper - 5.14.2-r6
perl-module-dynaloader - 5.14.2-r6
perl-module-errno - 5.14.2-r6
perl-module-exporter - 5.14.2-r6
perl-module-exporter-heavy - 5.14.2-r6
perl-module-extutils-cbuilder-platform-windows-gcc - 5.14.2-r6
perl-module-file-basename - 5.14.2-r6
perl-module-file-compare - 5.14.2-r6
perl-module-file-copy - 5.14.2-r6
perl-module-file-glob - 5.14.2-r6
perl-module-file-spec-unix - 5.14.2-r6
perl-module-file-stat - 5.14.2-r6
perl-module-getopt-long - 5.14.2-r6
perl-module-io - 5.14.2-r6
perl-module-io-file - 5.14.2-r6
perl-module-overload - 5.14.2-r6
perl-module-posix - 5.14.2-r6
perl-module-strict - 5.14.2-r6
perl-module-text-parsewords - 5.14.2-r6
perl-module-vars - 5.14.2-r6
perl-module-xsloader - 5.14.2-r6
perl-modules - 5.14.2-r6
poco - 1.3.6p2-r4
portmap - 6.0-r7
release-notes - 0.10.1-r1
rrdtool - 1.4.7-r1
rsync - 3.0.9-r0
runit - 2.1.1-r6
shadow - 4.1.4.3-r6
svlogd2 - 2.1.1-r3
synchwclock - 0.3-r5
system-addon-metering - 1.2.4-r1
system-addon-presence-simulator - 1.3.8-r1
system-addon-scene-responder - 1.3.9-r1
system-addon-timed-events - 1.3.7-r1
system-addon-user-defined-actions - 1.3.1-r1
sysvinit - 2.88dsf-r6
sysvinit-inittab - 2.88dsf-r11
sysvinit-pidof - 2.88dsf-r6
task-boot - 1.0-r56
task-core-apps-console - 1.0-r35
task-perl-module-all-dbg - 1.0-r3.6
task-system-addons - 1.0-r5
tinylogin - 1.4-r8
tzdata - 2011g-r11.0
tzdata-africa - 2011g-r11.0
tzdata-americas - 2011g-r11.0
tzdata-antarctica - 2011g-r11.0
tzdata-asia - 2011g-r11.0
tzdata-atlantic - 2011g-r11.0
tzdata-australia - 2011g-r11.0
tzdata-europe - 2011g-r11.0
tzdata-pacific - 2011g-r11.0
u-boot-dss11 - 2012.07-r1
u-boot-utils-dss11 - 2011.09-r2
udev - 164-r10
udev-extraconf - 0.0-r3
update-alternatives-cworth - 1:0.1.8+svnr635-r16
update-modules - 1.0-r11
update-rc.d - 0.7-r5
upnpbeacon - 0.1.0-r7
usbutils - 0.91-r3
usbutils-ids - 0.91-r3
util-linux-blkid - 2.19.1-r15
util-linux-flock - 2.19.1-r15
wireless-tools - 1:29-r2
wpa-supplicant - 0.7.3-r6
wpa-supplicant-cli - 0.7.3-r6
wpa-supplicant-passphrase - 0.7.3-r6
zd1201-firmware - 0.14-r1
zd1211-firmware - 1.4-r1



Vielleicht hilft das ja weiter?







-----Ursprüngliche Nachricht-----
Von: dss-developer-bounces at forum.digitalstrom.org [mailto:dss-developer-bounces at forum.digitalstrom.org] Im Auftrag von Sergey 'Jin' Bostandzhyan
Gesendet: Sonntag, 17. Februar 2013 11:11
An: dSS development list
Betreff: Re: [dss-developer] dSS, WIfi und keinen Webserver mehr

Hallo Glenn,

On Sun, Feb 17, 2013 at 10:23:58AM +0100, Glenn Herrmann IT-7 EDV-Dienstleistungen wrote:
> hab mein dSS vor ein paar Tagen auf einen USB Wifi stick umgestellt, 
> dieser läuft auch hervorragend nur der dSS startet nun nicht mehr und 
> bleibt mit dem Fehler stehen bzw in ner Schleife hängen.

generell musst du im Hinterkopf behalten, dass WiFi derzeit zwar gehen kann weil es eben ein Linux System ist und wir WiFi Kernel Module installieren können, aber "im Produkt" wird es aktuell nicht unterstützt. Das bedeutet, die Konfiguration über das Web Interface wird nicht gehen, deine handgestrickte Konfiguration könnte bei einem Update überschrieben werden usw.

> [2013-02-15 13:53:29][Fatal][System] Failed to initialize subsystem
> 'WebServer': Could not start webserver
> 
> [2013-02-15 13:53:29][Fatal][System] Failed to initialize subsystems, 
> exiting...
> 
> Hat jemand ne Idee wie ich mehr Informationen rausbekommen kann?
 
Ich würde fast vermuten dass du dir irgendwie zufällig das loopback Interface wegkonfiguriert hast, dieses wird vom dSS Webserver aber gebraucht.

Hast du ein "lo" mit 127.0.0.1 wenn du ifconfig eingibst?

Grüsse,
Sergey

_______________________________________________
dss-developer mailing list
dss-developer at forum.digitalstrom.org
http://forum.digitalstrom.org/cgi-bin/mailman/listinfo/dss-developer


More information about the dss-developer mailing list