[dss-merge-requests] Build failed in Jenkins: yocto #2007
dS Jenkins
jenkins at dev.digitalstrom.org
Tue Nov 13 13:08:53 CET 2018
See <http://dsjenkins.cloudapp.net/jenkins/job/yocto/2007/display/redirect?page=changes>
Changes:
[andreas.fenkart] stash cleanrescuepkg
[andreas.fenkart] cleanrescuepkg: add task option
[andreas.fenkart] rescue-initramfs: check_item_size: emit error if file does not exist
[andreas.fenkart] cleanrescuepkg: run task force fully
[andreas.fenkart] clearescuepkg: remove whitespace
------------------------------------------
[...truncated 18.50 KB...]
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1966080 sent adjust 131072
debug2: channel 0: window 1978807 sent adjust 118345
debug2: channel 0: read<=0 rfd 4 len 0
debug2: channel 0: read failed
debug2: channel 0: close_read
debug2: channel 0: input open -> drain
debug2: channel 0: ibuf empty
debug2: channel 0: send eof
debug3: send packet: type 96
debug2: channel 0: input drain -> closed
debug3: receive packet: type 98
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug3: receive packet: type 96
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug3: receive packet: type 97
debug2: channel 0: rcvd close
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug3: send packet: type 97
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)
debug3: send packet: type 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: fd 2 clearing O_NONBLOCK
Transferred: sent 4556, received 5855952 bytes, in 1.4 seconds
Bytes per second: sent 3195.2, received 4106930.0
debug1: Exit status 0
+ ./buildyoctofeed -b devel
Configured feed: "devel"
Building bootstrap packages
NOTE: Started PRServer with DBfile: /home/****/workspace/yocto/poky-devel-nopkg-build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 39063, PID: 47
WARNING: Host distribution "CentOS-Linux-7.5.1804" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution.
Loading cache...done.
Loaded 2606 entries from dependency cache.
Parsing recipes...done.
Parsing of 2113 .bb files complete (2029 cached, 84 parsed). 2694 targets, 409 skipped, 19 masked, 0 errors.
NOTE: Stamp /home/****/workspace/yocto/poky-devel-nopkg-build/build/stamps/all-poky-linux/ulux/0.0.0+gitr26+8211ae0-r1 is not reachable, removing related manifests
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.28.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "CentOS-Linux-7.5.1804"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "dss20"
DISTRO = "poky"
DISTRO_VERSION = "2.0.2"
TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "HEAD:ddbc13155f4db5d98976dc93b586c0be4fc740d1"
meta-oe
meta-python
meta-networking
meta-webserver
meta-multimedia = "HEAD:cb7e68f2a39fa6f24add48fc7b8d38fb7291bb44"
meta-fsl-arm = "HEAD:19fa4c0ae14f38cfba52c9b65494b8f066c36a66"
meta-fsl-arm-extra = "HEAD:dd074c47af53948041f6c5671e519fbf815b0980"
meta-swupdate = "HEAD:d9b64419578fba2a459badd95660b7e83fcc49e4"
meta-digitalstrom-devel = "HEAD:0a52d11a8f1f7f6affc8246f2adce3a860fbe807"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 261 tasks of which 261 didn't need to be rerun and all succeeded.
Summary: There was 1 WARNING message shown.
Ready to import signature keys, see import-keys.sh
Step can be skipped if keys were imported before and keyring was not deleted
+ ./utilities/import-keys.sh -f devel -k ****-devel.priv.pem ****-devel.x509.pem
gnupg broken on CENTOS_75, enabling gnupg-native workaround...
gpg: NOTE: THIS IS A DEVELOPMENT VERSION!
gpg: It is only intended for test purposes and should NOT be
gpg: used in a production environment or with production keys!
gpg: key 67E16953: "digitalSTROM **** <support at digitalSTROM.com>" not changed
gpg: key 67E16953: secret key imported
gpg: WARNING: key 67E16953 contains preferences for unavailable
algorithms on these user IDs:
gpg: "digitalSTROM **** <support at digitalSTROM.com>": preference for compression algorithm 3
gpg: it is strongly suggested that you update your preferences and
gpg: re-distribute this key to avoid potential algorithm mismatch problems
gpg: cannot open '/dev/tty': No such device or address
gpgsm: NOTE: THIS IS A DEVELOPMENT VERSION!
gpgsm: It is only intended for test purposes and should NOT be
gpgsm: used in a production environment or with production keys!
gpgsm: total number processed: 1
gpgsm: unchanged: 1
+ ./utilities/prepare-builder-conf.sh devel
No extra cmds!
+ echo 'No extra cmds!'
+ ./buildyoctofeed -w -m dss20 devel
[INFO] Selected machines: dss20
gnupg broken on CENTOS_75, enabling gnupg-native workaround...
gpgsm: NOTE: THIS IS A DEVELOPMENT VERSION!
gpgsm: It is only intended for test purposes and should NOT be
gpgsm: used in a production environment or with production keys!
Verifying checksums...
~/workspace/yocto/poky-rescue-devel-build ~/workspace/yocto
build/deploy/images/dss20/rescue-devel-update--dss20-20181113114243.swu: OK
~/workspace/yocto
[INFO] Starting signing process...
rescue-devel-update--dss20-20181113114243.swu... signing
gpgsm: NOTE: THIS IS A DEVELOPMENT VERSION!
gpgsm: It is only intended for test purposes and should NOT be
gpgsm: used in a production environment or with production keys!
gpgsm: DBG: adding certificates at level -1
gpgsm: signature created
[INFO] no images pending to be signed for poky-devel-nopkg-build
Building images for devel feed
Configured feed: "devel"
Building configuration for targets/devel/dss20-yocto-rescue
[INFO] PACKAGES: rescue-initramfs rescue-swuimage update-info-file rescue-usbimage
NOTE: Started PRServer with DBfile: /home/****/workspace/yocto/poky-rescue-devel-build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 45701, PID: 1107
WARNING: Host distribution "CentOS-Linux-7.5.1804" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution.
Loading cache...done.
Loaded 2333 entries from dependency cache.
Parsing recipes...done.
Parsing of 1793 .bb files complete (1788 cached, 5 parsed). 2336 targets, 352 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.28.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "CentOS-Linux-7.5.1804"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "dss20"
DISTRO = "poky"
DISTRO_VERSION = "2.0.2"
TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "HEAD:ddbc13155f4db5d98976dc93b586c0be4fc740d1"
meta-oe
meta-python
meta-networking
meta-webserver = "HEAD:cb7e68f2a39fa6f24add48fc7b8d38fb7291bb44"
meta-swupdate = "HEAD:d9b64419578fba2a459badd95660b7e83fcc49e4"
meta-digitalstrom-rescue-devel = "HEAD:0a52d11a8f1f7f6affc8246f2adce3a860fbe807"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 1690 of 1761 (ID: 8, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-initramfs.bb, do_rootfs)
NOTE: Running task 1704 of 1761 (ID: 273, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-usb-initramfs.bb, do_rootfs)
NOTE: Running noexec task 1711 of 1761 (ID: 40, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-digitalstrom/update-info-file/update-info-file_0.1.bb, do_fetch)
NOTE: Running noexec task 1712 of 1761 (ID: 36, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-digitalstrom/update-info-file/update-info-file_0.1.bb, do_unpack)
NOTE: Running noexec task 1713 of 1761 (ID: 37, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-digitalstrom/update-info-file/update-info-file_0.1.bb, do_patch)
NOTE: recipe rescue-initramfs-1.0-r8: task do_rootfs: Started
NOTE: recipe rescue-usb-initramfs-1.0-r7: task do_rootfs: Started
NOTE: recipe rescue-initramfs-1.0-r8: task do_rootfs: Succeeded
NOTE: Running task 1720 of 1761 (ID: 17, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-initramfs.bb, do_prepare_rs_upload)
NOTE: recipe rescue-initramfs-1.0-r8: task do_prepare_rs_upload: Started
NOTE: recipe rescue-initramfs-1.0-r8: task do_prepare_rs_upload: Succeeded
NOTE: Running task 1721 of 1761 (ID: 7, /home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-initramfs.bb, do_upload_rs)
NOTE: recipe rescue-initramfs-1.0-r8: task do_upload_rs: Started
ERROR: Function failed: do_upload_rs (log file is located at /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/temp/log.do_upload_rs.14615)
ERROR: Logfile of failure stored in: /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/temp/log.do_upload_rs.14615
Log data follows:
| DEBUG: Executing shell function do_upload_rs
| NOTE: upload_rs: start
| NOTE: rs-upload: repository: https://git.digitalstrom.org/dss-oe/rescue-images.git
| NOTE: rs-upload: checkout folder: /home/****/workspace/yocto/downloads/rescue-images
| Already on 'master'
| Your branch is ahead of 'origin/master' by 3 commits.
| (use "git push" to publish your local commits)
| From https://git.digitalstrom.org/dss-oe/rescue-images
| * branch master -> FETCH_HEAD
| Already up-to-date.
| rm 'dss20/rescue-initramfs/desc'
| rm 'dss20/rescue-initramfs/md5sums'
| rm 'dss20/rescue-initramfs/rescue-devel-initramfs-dss20.cpio.gz.u-boot'
| rm 'dss20/rescue-initramfs/uImage-kernel--dtb-imx6dl-dss20-rescue.bin'
| NOTE: upload_rs: copy images
| NOTE: rs-upload: add /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/rescue-devel-initramfs-dss20.cpio.gz.u-boot to repository /home/****/workspace/yocto/downloads/rescue-images
| '/home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/rescue-devel-initramfs-dss20.cpio.gz.u-boot' -> 'dss20/rescue-initramfs/rescue-devel-initramfs-dss20.cpio.gz.u-boot'
| NOTE: rs-upload: add /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/uImage-kernel--dtb-imx6dl-dss20-rescue.bin to repository /home/****/workspace/yocto/downloads/rescue-images
| '/home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/uImage-kernel--dtb-imx6dl-dss20-rescue.bin' -> 'dss20/rescue-initramfs/uImage-kernel--dtb-imx6dl-dss20-rescue.bin'
| NOTE: rs-upload: add /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/md5sums to repository /home/****/workspace/yocto/downloads/rescue-images
| '/home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/md5sums' -> 'dss20/rescue-initramfs/md5sums'
| NOTE: rs-upload: add /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/desc to repository /home/****/workspace/yocto/downloads/rescue-images
| '/home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/rescue-initramfs-1.0/desc' -> 'dss20/rescue-initramfs/desc'
| NOTE: rs-upload: Adding commit for rescue system dss20/rescue-initramfs/
| [master 8490269] Automatic commit of dss20 rescue-initramfs
| 3 files changed, 2 insertions(+), 2 deletions(-)
| fatal: could not read Username for 'https://git.digitalstrom.org': No such device or address
| WARNING: /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/temp/run.do_upload_rs.14615:1 exit 128 from
| git push origin "master"
| ERROR: Function failed: do_upload_rs (log file is located at /home/****/workspace/yocto/poky-rescue-devel-build/build/work/dss20-poky-linux-gnueabi/rescue-initramfs/1.0-r8/temp/log.do_upload_rs.14615)
NOTE: recipe rescue-initramfs-1.0-r8: task do_upload_rs: Failed
ERROR: Task 7 (/home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-initramfs.bb, do_upload_rs) failed with exit code '1'
NOTE: recipe rescue-usb-initramfs-1.0-r7: task do_rootfs: Succeeded
NOTE: Tasks Summary: Attempted 1721 tasks of which 1714 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/****/workspace/yocto/yocto/dS/meta-digitalstrom-rescue-devel/recipes-extended/images/rescue-initramfs.bb, do_upload_rs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
bitbake returned 1, manual interaction required!
Build step 'Execute shell' marked build as failure
Not sending mail to unregistered user Krzysztof.Michonski at digitalstrom.com
Not sending mail to unregistered user andreas.fenkart at dev.digitalstrom.org
More information about the dSS-merge-requests
mailing list