[dss-developer] Klemmenbefestigung (Daniel Weber)

[Bryant Hansen]

Hi All,

One technique that I like is to use involves fixing them to a 35mm
Hutschien rail, like this one:
http://www.oconda.org/media/so/soEatonMoeller_TS35x75_20307240497.jpg

The klemmen fit snugly, mounted in a row, in the center channel of the
hutschien, providing easy access to the screw terminals of the
Luesterklemme or the cables of the Tasterklemme.

Then, as Miguel mentioned, use some long screws to hold the klemmen in
place.  I generally use M3 30mm bolts, though M4s might fit the notches
on the sides on the klemmen better.

Down the center of the hutschien, there are slots where the bolts can be
mounted without any drilling involved.  Use a couple of washers and a
nut to hold them in place.  Adjust them to the size of the klemme and
tighten.

After placing the klemme in the channel, with bolts snug on both sides,
additional screws can be placed over the top, to insure that they don't
slide out of place.  You might find that this step isn't necessary.

I could post pictures of a completed assembly on Monday if anyone is
interested.

Cheers,

Bryant

[1]Datasheets of a couple of compatible klemme:
http://aizo.com/de/downloads/documents/MontageanleitungGE-KM200_DE_EN_FR_IT_2011-04-05.pdf
http://aizo.com/de/downloads/documents/MontageanleitungGE-TKM210_DE_EN_FR_IT_2011-04-05.pdf



Am 05/20/11 14:53, schrieb Rodriguez, Miguel:
> Hi Daniel
> 
>> Hallo, jetzt hab ich eine Frage an die, die ein Demonstrationsbrett aufgebaut haben. Ich wollte wissen ob ihr Halter kennt f?r >die Klemmen insbesondere f?r die Tasterklemme. Da ich mein ein neues Brett am aufbauen bin und es dementsprechend >gut aus sehen soll. Gibt es da was?
> 
> There are 3 possibilities:
> 
> 1) If you use solid wire, you can form them and have  klemme M  directly mounted. This is how we build the Demokoffern.  This is not good for Tasterklemme.
> 
> 2) You can get some screw holes drilled in your base board and then hold both sides of the klemme to these screws (kind of a rail mount). This is what we do on our test systems using wood as base boards
> 
> 3)If you want to keep the klemme under the taster, you can use Kabelbinder to hold it tight.  This is how we do it in our demonstration room.
> 
> If you have any better ideas let us know :-)
> 
> Hope this helps
> 
> Miguel Rodriguez
> Aizo AG
> 
> _______________________________________________
> dss-developer mailing list
> dss-developer at forum.digitalstrom.org
> http://forum.digitalstrom.org/cgi-bin/mailman/listinfo/dss-developer